Results 1 to 3 of 3

Thread: Ministry of Textiles - Jute Technology Mission(JTM).

  1. #1
    Super Moderator
    Join Date
    Mar 2010
    Location
    NEW DELHI
    Posts
    6,224

    Thumbs up Ministry of Textiles - Jute Technology Mission(JTM).

    Ministry of Textiles

    Jute Technology Mission

    The Government, on June 2, 2006, approved the Jute Technology Mission (JTM). The Department of Agricultural Research & Education, Ministry of Agriculture, launched the Mini Mission I of the JTM on November 9, 2006. The Department of Agriculture & Cooperation, Ministry of Agriculture, launched the Mini-Mission II of JTM on December 21, 2006. The Mini Mission III & IV of JTM were launched by the Ministry of Textiles on February 6, 2007. The Jute Technology Mission (JTM) will be executed during the XIth Plan with an overall outlay of Rs.355.55 crores. The objectives of JTM are:To improve yield and quality of jute fibre;To strengthen existing infrastructure for development and supply of quality seeds;Improvement of quality of fibre through better methods of retting and extraction technologies;To increase the supply of quality raw material to the jute industry at reasonable prices and to develop efficient market linkage for raw jute;To modernize, technologically upgrade, improve productivity, diversify and develop human resource for the jute industry;To develop and commercialise innovative technology for diversified use of jute and allied fibres.

    The operationalisation of JTM through its four Mini Missions is at table 6.9. <center>Table 6.9
    </center>

    Mini Missions Objectives Executing Ministry Proposed outlay(Rs in crores)
    Mini Mission I To strengthen agricultural research and technology achievements Ministry of Agriculture
    7.06
    Mini Mission II Development/extension of raw jute and transfer of improved technology Ministry of Agriculture
    49.90
    Mini Missiosn III To develop efficient market linkages for raw jute Ministry of Textiles
    38.60
    Mini Mission IV To modernize, technologically upgrade, improve productivity, diversify and develop human resource for the jute industry. Ministry of Textiles
    260.00
    • TOTAL
    355.55

  2. #2
    Super Moderator
    Join Date
    Mar 2010
    Location
    NEW DELHI
    Posts
    6,224

    Thumbs up Ministry of Textiles - Jute Technology Mission - MINI MISSION - III.

    Ministry of Textiles

    Jute Technology Mission


    MINI MISSION - III

    1. Development Of Market Yard.


    Under this scheme, it is proposed to construct 10 marketing yards in major jute growing districts in the Country. Approximately, the arrival of raw jute in these market yard should be 10,000 MT and above per annum. The estimated cost of these jute specific market yards is Rs.1 crore. The scheme would be providing 60% funding and APMCs would contribute balance 40% of the total cost besides providing/acquiring land for the purpose of establishment of the market yards.


    2. Construction Of JCI Departmental Purchase Centres.


    In this scheme, it is proposed to construct 20 such facilities under the aegis of JCI in strategically important jute growing States where there is standing need for the same. The cost of construction is estimated at Rs.1 croroe per DPC including cost of acquisition of land. The entire cost will be borne by Government of India.


    3. Construction Of Retting Tanks.


    Since retting is the most important part of jute cultivation in terms of quality fibre production, non-availability of adequate retting water poses hindrance in production of quality output. Encouraged by the successful outcome of our earlier project on construction of Community Retting Tanks, it is proposed to construct Retting Tanks to facilitate retting at least one in each jute producing districts of India in phased manner. In next five years, it is proposed to construct 50 retting tanks in staggered manner to provide retting water to the jute growers. It can also be utilized for demonstration and adoption of new retting methods like Biotechnological Retting Method by use of inoculum in order to improve the quality of jute fibre as well as reducing retting period. 90% of the cost of construction of retting tank would be sponsored under this scheme, and the remaining 10% would be contributed by the beneficiary.


    4. Demonstration Of Retting Technology And Training To Jute Growers.


    Latest techniques in the jute cultivation, improved retting methods will be popularized through this programme. Expertise of CRIJAF and NIRJAFT in the allied fields will be the source of knowledge bank. This scheme will help in upgrading the quality of jute produced and the changing demand of the industry can be taken care of. Under this scheme, a programme spread over five years has been formulated so that maximum number of jute growers can be brought under this training programme. Local Panchayats and State Agricultural Departments will also be involved for successful implementation. The training programme are organized so that proper dissemination of latest techniques can be made available to the jute growers at large. Follow- up measures are undertaken so that the training imparted is effectively implemented .The training programmes are being conducted through JCI DPCs in the jute growing districts of India.

    5. Development Of Ribboners.

    Already considerable work in this field has been done by CRIJF and NIRJAFT. In this scheme, further developments of the existing ones and to make them acceptable to the jute growers, concerned institutions have been initiated. The infrastructure of JCI will be utilized to distribute the developed machines to jute growers. For effective implementation of the project, extensive demonstration before the growers would be organised to popularize the Ribboner Machine and to apprise them about the benefit of use of the same.

  3. #3
    Super Moderator
    Join Date
    Mar 2010
    Location
    NEW DELHI
    Posts
    6,224

    Thumbs up Ministry of Textiles - Jute Technology Mission - MINI MISSION IV.

    Ministry of Textiles

    Jute Technology Mission


    MINI MISSION IV.

    (for Operating Manuals of the Schemes, pl. click on the particular Scheme Title)

    A . Scheme For Modernisation Of Organised Jute Mills -:


    1. Training Of Workers & Supervisors.
    Under this scheme, training programmes for the supervisors and workers for updating their knowledge and improve their skill in both processing stages and maintenance are organised in various jute mills through the Institute of Jute Technology (IJT). Various training manuals and modules have been developed and appropriate Human Resource Development (HRD) capsules designed and implemented under the programme. A total of 300 programmes will be conduced and 15000 workers will be trained over a span of five years. HRD intervention is sought to improve the sill and update the knowledge of workers to match with the changed situation/environment.


    2. Machinery Development .

    One of the main bottleneck for modernization of jute industry is lack of availability of new technology machines for jute fiber. Under this scheme, Research and Development efforts as well as the transfer of technology at each stage of processing is to be intensified and appropriate activities taken up.

    For the development of new technology and high yielding machinery, a Machinery Development Centre (CJMD) would be established through PPP model. In addition, specific machinery development projects are being funded @ 75%, to be taken up through the proposed CJMD, indigenous machinery manufacturers as well as research institutions who have the credibility and required infrastructure.


    3. Productivity Improvement & TQM Facilitation.

    This scheme provides an integrated and cohesive approach for supporting Jute Machinery Development Programmes under Mini-Mission IV of JTM and thereby considers time-bound proposals for financial support. Following studies are planned in this scheme.


    • Total Quality Management
    • Energy Management
    • Waste Management
    • Maintenance Management
    • Work Study & Ergonomics

    JMDC is conducting the studies by involving Institute(s) of repute at national level

    4. Acquisition Of Machinery And Plant (Subsidy Component).

    Under this scheme, the jute industry is being supported to adopt new technology machinery as required for production of jute based products, conventional and non-conventional like foodgrade / odourless products, technical and industrial textiles, etc. The adoption of such new machinery will enable the Indian Jute Industry to cater to the demand of global market in terms of cost and quality in the coming years.

    Various items of machinery and equipment, such as, Jute spreader machine, Spinning Preparatory System, Intersecting Gill, Finisher Drawing Frame, Apron/Slip Draft Flyer Spinning Frames, Ring Spinning Frames, Traditional hessian looms, High Speed Flexible of Rapier looms and Sulzer (Projectile) and Rigid Rapier (Denier)/Flexible Rapier (Sulzer) loom will be acquired and installed by identified mills/units. Support will be provided for the same @ 20% Capital Subsidy. The entrepreneurs are free to choose between this Scheme or the interest subsidy scheme under the TUFS.

    The maximum subsidy available in this scheme is Rs.75 lakhs in case of existing mills, which may be enhanced to Rs.1 crores for North Eastern States and Rs.1 crore for altogether new mills.


    B. Scheme For Promotion Of Jute Diversification &ndash;


    Design & Development Of Jute Diversified Products.


    NCJD has been operating a scheme on design and product development of jute diversified products for the last few years. It has been observed that in order to make jute products more acceptable to consumers in different sectors, it is essential to incorporate innovative designs and also add newer product range for diverse application. It is contemplated that it would be relevant to explore the characteristics of basic jute products, as that will help development of new products and new application areas for jute. The subject scheme also envisages to explore the use of jute yarn in Handloom sector, where the scope of developing new design for fabric and other woven products is very high. The scheme covers areas like designing & developing jute fabric on handloom, for diversification and end uses. Similarly, research on jute composites could open up new application areas in the field of packaging like boxes, containers and also as a cushioning media.


    Scheme For Helping The NGOs And Women Self Help Groups (WSHGs)


    NCJDs assistance to voluntary Organisation has been very effective. Such organizations and those comprising of small and tiny entrepreneurs could effectively contribute in mobilising jute activity, especially in rural areas. Unemployed youth and women folk could very conveniently adapt to such simple technologies that are required to produce jute-diversified products (JDP). The technology dissemination activity is taken up in such a manner so as to make it more effective by engaging technical personnel. In addition to the above inputs, the scheme includes a provision for matching finance for machinery assistance. Such assistance will create an environment, which will be conducive to the growth of voluntary sector.


    Scheme For Promotion Of Jute Diversification


    The old schemes of the NCJD viz.Jute Service Centre Scheme , Jute Raw Material Bank Scheme, Design/ Product Development Scheme, Market Support Scheme, Jute Entrepreneur Assistance Scheme and the Schemes for the North East Region have been merged and renamed as the &ldquo;Scheme for Promotion of Jute Diversified Products&rdquo;.


    The objective of the scheme is to establish the competitive environmental advantage of jute globally as well as boost the sale of jute goods by 50% globally and increase the share of JDPs to around 20% during the JTM period. In order to achieve the objective as given in the National Jute Policy 2005 an integrated approach is envisaged and conceptualized with emphasis on following key elements:


    Developmental Schemes Jute Service Centre Scheme
    Input Related Scheme Jute Raw Material Bank Scheme
    Marketing Schemes Market Promotion Schemes And Campaigns For Jute Diversified Products

    Scheme For Commercialisation Of Technology.



    Under this scheme, NCJD would take up promotion of commercialization of technologies by interacting with the different State&rsquo;s Department and the DICs, holding of different Technological Conferences around the country, counseling and interactive programme for participation with different stakeholders, holding products specific workshops in potential areas, technology experimentation and machinery and process development.


    Scheme For Setting Up Of Jute Parks For The Diversified Sector.


    This scheme aims at providing entrepreneurs with support facilities similar to those available in Export Processing Zones. The aim of the Scheme is to attract entrepreneurs / units investing in new small jute mills / spinning units / weaving units with a view to generate employment / upgrade technology to optimize exports based on value addition. The scheme would be executed through PPP mode on the lines of SITP scheme of Ministry of textiles. The subsidy available under this scheme for establishment of Jute park is 40%, subject to a maximum of Rs 7.5 Crored for NE states and Rs. 5 Crores for other states.
    C. Programmes for North East Region


    10 % of the Jute Technology Mission budget has been reserved for executing the JTM schemes in the North East Region covering Assam, Arunachal Pradesh, Meghalaya, Manipur, Mizoram, Nagaland, Sikkim and Tripura.

Tags for this Thread

Bookmarks

Posting Permissions

  • Register / Login to post new threads
  • Register / Login to post replies
  • Register / Login to post attachments
  • You may not edit your posts
  •